Vinyl to Vinyl

CATEGORY
 

Vinyl to Vinyl

The Vinyl to Vinyl lineal drain is installed at the front of the shower, between the two side walls of the shower/bathroom with, vinyl on either side of the lineal drain.  This drain has been specially designed for use with vinyl floors. The vinyl floor covering is rolled into the drain and is locked in place by retention bars which are fixed to the drain using stainless steel screws, ensuring the vinyl floor runs seamlessly into the drain, for both appearance and waterproofing.

Vinyl to Vinyl Lineal Drain

The standard features of the Vinyl to Vinyl Lineal Drain include:

  • Drain tray with built-in fall, either left or right
  • Easy to install and waterproof
  • Standard 50mm male threaded waste located 75mm to centre from end of drain;
  • Manufactured from 316 (marine) grade stainless steel;
  • Drain is electro-polished to prevent tea-staining;
  • 50+mm flashings on horizontal surfaces, which meet or exceed Australian Standards for flashing on horizontal surfaces;
  • Weep slots in the horizontal flashing tile lip to allow any water which escapes past the tile seals to drain back into the drain channel and not build up under tiles, causing water damage.
  • Available in either brushed or polished finishes
  • Vinyl retention bars and screws are fitted in the drain channel

 

The custom features of the Vinyl to Vinyl Lineal Drain include:

  • Drain length is manufactured to your specification;
  • Outlet location can be located to suit your requirements;
  • Outlet can be changed to be a stainless steel dropper, size to suit.