Contact Us

Phone
03 9758 0588

Email
sales@creativedrainsolutions.com.au

Address
Factory 7, 69 Acacia Road,
Ferntree Gully VIC 3156

Online Enquiry

* Required fields

Advantage Absolute

 

The Advantage Absolute is an all-in-one integrated drain and flashing solution which allows you to install a linear drain at the front of a shower, on a level floor, without the need for structural changes to the floor or sub-floor structure. You only need to be able to move the plumbing to meet the outlet on the lineal drain

The Absolute is ideal when updating a bathroom in an existing house or when installing a lineal drain in a new house without the need to lower the floor in the shower base area.

The Advantage Absolute consists of a lineal drain and an integrated “F” flashing when installing the shower in the corner of the bathroom, or 2 integrated “F” flashings when installing the shower in a location which does not have a sidewall.

The “F” flashing is mounted on the floor between the rear wall and the lineal drain and provides a 30mm high channel which will hold the side glass shower screen. The 30mm high “F” flashing is used as the sidewall section for the screed which is applied to create the 15mm of fall required in the shower base (from back to front).

Creative Drain Solutions recommends the use of Arditex NA2, as the screed. This product allows the screed to be applied from a feather edge to a maximum depth of 15mm (in a single application.  Generally, mortar-based screeds are unsuitable for this application. We recommend a second layer of waterproofing is applied after application of the screed.

External to the shower base, the floor tiles are laid against the outside edge of the 30mm “F” Flashing. For more information on the Absolute Linear Drain and how it is installed, please consult the “Installation Guides” section on this web site.

Available in the following styles:

  • 7 Bar Grate
  • Tile Insert Tray

Features:

  • Customisable Blankouts
  • Weep holes to eliminate water hydration from under the tile
  • Fixing points
  • Incorporated waterproof flanges
  • Fully customisable to the required length and your tile thickness

Optional Extras:

  • Additional droppers
  • Outlet locations greater than 100mm from an end
  • Multi-direction fall
  • Powdercoating
  • Mitred corners
  • Curved drains to any radius or width required

 

Included as standard:

  • Custom lengths
  • Built-in fall to left or right
  • Exclusively made from 316 Brushed Marine Grade Stainless Steel
  • Passivated and Electro-polished to prevent tea staining
  • Welded end caps
  • Manufactured to suit your tile thickness
  • Single dropper of your choice within 75-100mm from an end
  • Weep slots in horizontal flashing to discharge any water under the tiles
  • 50+mm built-in stainless steel flashing on horizontal surfaces to meet and or exceed Australian Standards for flashing on horizontal surfaces
  • All Tile Insert linear drains are delivered with a suction cup to aid the removal of the tile insert tray. Please Note: The suction cup should only be used to lift the tile insert tray at one end, allowing the tray to be grasped by hand and carefully lifted out. The suction cup is unlikely to work on porous stone or tile surfaces such as bluestone or marble
Enquire Now