Advantage Template

The Advantage Wall to Tile Lineal Drain is installed along the rear wall of the shower; between the wall  and the tiled floor or shower screen at the other end.

The Tile Insert lineal drain utilises a stainless-steel tray on which the tiles or stone of your choice are mounted, providing a discrete, virtually invisible drainage solution.

Features:

• Easy to install
• Fixing points provided
• Available in either Punched Slot, 7 Bar Grate or Tile insert Tray.
• Incorporated waterproof flanges
• Fully customisable to required length and your tile thickness

Optional Extras:

• Additional droppers
• Outlet locations greater than 175mm from an end
• Multi-direction fall
• Powdercoating
• Mitred corners
• Curved drains to any radius or width required

Download the tech sheet  HERE.

Included as standard:

• Custom lengths
• Built in fall to left or right
• Exclusively made from 316 Brushed Marine Grade Stainless Steel
• Passivated and Electro-polished to prevent tea staining
• Welded end caps
• Manufactured to suit your tile thickness
• Single dropper of your choice within 175mm from an end
• Weep slots in horizontal flashing to discharge any water under the tiles
• 50+mm built in stainless steel flashing on horizontal surfaces to meet and or exceed Australian Standards for flashing on horizontal surfaces
• All Tile Insert lineal drains are delivered with a suction cup to aid the removal of the tile insert tray. Please Note: The suction cup should only be used to lift the tile insert tray at one end, allowing the tray to be grasped by hand and carefully lifted out. The suction cup is unlikely to work on porous stone or tile surfaces such as bluestone or marble