Contact Us

03 9758 0588


Factory 7, 69 Acacia Road,
Ferntree Gully VIC 3156

Online Enquiry

* Required fields

Advantage Tile to Tile with Glass Insert


The Advantage Tile to Tile with Glass Insert lineal drain is installed at the front of the shower, between the two side walls of the shower with floor tiles on either side of the lineal drain. A glass insert channel is integrated into the drain channel to support the shower screen glass.

With this drain, the glass insert ensures water hitting the glass and door will go straight down into the drain, minimising the chance of water leaking outside the shower area. The drain will have a thin grate on either side of the glass insert section, and a full-width grate at the shower door.
This design with the centre screen insert allows for drainage from either side of the screen eliminating the need for a secondary drainage point in the bathroom, simplifying the installation process for plumbing.

Available in the following styles:

  • 7 Bar Grate
  • Tile Insert Tray
  • Height Adjustable Tile Insert Tray 
  • Punched Slot

    Download our Tech pages here:


    • Customisable Blankouts
    • Weep holes to eliminate  water hydration from under the tile
    • Fixing points
    • Incorporated waterproof flanges
    • Fully customisable to the required length and your tile thickness


    Optional Extras:

    • Additional droppers
    • Outlet locations greater than 100mm from an end
    • Multi-direction fall
    • Powdercoating
    • Mitred corners
    • Curved drains to any radius or width required




    Included as standard:

    • Custom lengths
    • Built in fall to left or right
    • Exclusively made from 316 Brushed Marine Grade Stainless Steel
    • Passivated and Electro-polished to prevent tea staining
    • Welded end caps
    • Manufactured to suit your tile thickness
    • Single dropper of your choice within 75-100mm from an end
    • Weep slots in horizontal flashing to discharge any water under the tiles
    • 50+mm built in stainless steel flashing on horizontal surfaces to meet and or exceed Australian Standards for flashing on horizontal surfaces
    • All Tile Insert lineal drains are delivered with a suction cup to aid the removal of the tile insert tray. Please Note: The suction cup should only be used to lift the tile insert tray at one end, allowing the tray to be grasped by hand and carefully lifted out. The suction cup is unlikely to work on porous stone or tile surfaces such as bluestone or marble
    Enquire Now