Contact Us

03 9758 0588


Factory 7, 69 Acacia Road,
Ferntree Gully VIC 3156

Online Enquiry

* Required fields


Advantage Wall to Tile Surround 


The Wall to Tile Surround Lineal Drain is a stainless-steel grated drain which is ideally suited to bathrooms and is installed against a wall and has floor tiles on the other three sides.


  • Customisable Blankouts
  • Weep holes to eliminate  water hydration from under the tile
  • Fixing points
  • Incorporated waterproof flanges
  • Fully customisable to the required length and your tile thickness

Available in the following styles:

  • 7 Bar Grate
  • Tile Insert Tray
  • Inverted Tile Tray
  • Height Adjustable Tile Insert Tray 
  • Punched Slot

Download our Tech Pages here:


    Optional Extras:

    • Additional droppers
    • Outlet locations greater than 100mm from an end
    • Multi-direction fall
    • Powdercoating
    • Mitred corners
    • Curved drains to any radius or width required

    Included as standard:

    • Custom lengths
    • Built-in fall to left or right
    • Exclusively made from 316 Brushed Marine Grade Stainless Steel
    • Passivated and Electro-polished to prevent tea staining
    • Welded end caps
    • Manufactured to suit your tile thickness
    • Single dropper of your choice within 75-100mm from an end
    • Weep slots in horizontal flashing to discharge any water under the tiles
    • 50+mm built-in stainless steel flashing on horizontal surfaces to meet and or exceed Australian Standards for flashing on horizontal surfaces
    • All Tile Insert linear drains are delivered with a suction cup to aid the removal of the tile insert tray. Please Note: The suction cup should only be used to lift the tile insert tray at one end, allowing the tray to be grasped by hand and carefully lifted out. The suction cup is unlikely to work on porous stone or tile surfaces such as bluestone or marble
    Enquire Now