Contact Us

Phone
03 9758 0588

Email
sales@creativedrainsolutions.com.au

Address
Factory 7, 69 Acacia Road,
Ferntree Gully VIC 3156

Online Enquiry

* Required fields

Advantage Balcony Wall to Tile

 

The Advantage Balcony Wall to Tile is a stainless-steel grated drain which is designed for outdoor balconies and is installed against the outer wall of the balcony, between the wall at one end of the balcony and a tile finish at the other end of the balcony.

Available in the following styles:

  • 7 Bar Grate
  • Tile Insert Tray
  • Height Adjustable Tile Insert Tray 
  • Punched Slot

Features:

  • Drain tray with built-in fall, either left or right
  • Easy to install and waterproof
  • Standard 75mm male stainless-steel dropper located 100mm to centre from end of the drain
  • Manufactured from 316 (marine) grade stainless steel
  • The drain is electro-polished to prevent tea-staining
  • Customisable Blankouts
  • Weep holes to eliminate  water hydration from under the tile
  • Fixing points
  • Incorporated waterproof flanges
  • Fully customisable to the required length and your tile thickness 

Optional Extras:

  • Glazing channels
  • Nibwall flashings
  • Additional droppers
  • Outlet locations greater than 100mm from an end
  • Multi-direction fall
  • Powdercoating
  • Mitred corners
  • Curved drains to any radius or width required

 

 

Enquire Now

 

 

Included as standard:

  • Custom lengths
  • Built-in fall to left or right
  • Exclusively made from 316 Brushed Marine Grade Stainless Steel
  • Passivated and Electro-polished to prevent tea staining
  • Welded end caps
  • Manufactured to suit your tile thickness
  • Single dropper of your choice within 75-100mm from an end
  • Weep slots in horizontal flashing to discharge any water under the tiles
  • 50+mm built-in stainless steel flashing on horizontal surfaces to meet and or exceed Australian Standards for flashing on horizontal surfaces
  • All Tile Insert linear drains are delivered with a suction cup to aid the removal of the tile insert tray. Please Note: The suction cup should only be used to lift the tile insert tray at one end, allowing the tray to be grasped by hand and carefully lifted out. The suction cup is unlikely to work on porous stone or tile surfaces such as bluestone or marble

 

 

Outlets Available:

  • 50mm Threaded Stainless Steel with PVC M&F Fitting
  • 65mm Threaded Stainless Steel with PVC M&F Fitting
  • 80mm Threaded Stainless Steel with PVC M&F Fitting
  • 50mm Stainless Steel Dropper
  • 65mm Stainless Steel Dropper
  • 75mm Stainless Steel Dropper
  • 88mm Stainless Steel Dropper